WE HAVE ALL PARTSCommercial equipment partsFind a part

Parts for this equipment

Mytee 1000DX-200 Speedster extractor, 230 V / 50 Hz parts

Check the listed revision, serial range, voltage, and connector before ordering.

Two-inch elbow inlet assembly

Fits this model
A926

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies A926 at find 77 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Brass female quick disconnect with 1/4-inch FPT

Fits this model
B102

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B102 at find 53 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass male-to-female street elbow

Fits this model
B103

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B103 at find 86 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass hex nipple

Fits this model
B107

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B107 at find 90 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch barb to 1/4-inch MPT adapter

Fits this model
B109

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B109 at find 55 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass tee

Fits this model
B113

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B113 at find 87 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Half-inch FPT stainless-mesh strainer

Fits this model
B119A

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B119A at find 60 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Brass tee with three 1/4-inch MPT ends

Fits this model
B135

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B135 at find 52 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass female-thread coupling

Fits this model
B142

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B142 at find 25 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-inch FPT coupling

Fits this model
B142A

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B142A at find 51 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Nut 1/4″ NPT

Fits this model
B156

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B156 at find 88 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Brass adapter with 1/2-inch barb

Fits this model
B160

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B160 at find 22 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/2-inch barb

Fits this model
B172

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B172 at find 29 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

1/2-inch brass ferrule

Fits this model
B173

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B173 at find 21 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

3/8-inch 90-degree brass street elbow

Fits this model
B186

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B186 at find 23 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Hex Bushing 1/2″

Fits this model
B210

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B210 at find 61 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Close Nipple 3/8″

Fits this model
B216

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B216 at find 62 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Brass 3/8-inch barb to 1/4-inch MPT adapter

Fits this model
B241

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B241 at find 43 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

90-degree brass 3/8-inch to 1/4-inch MPT elbow

Fits this model
B652

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B652 at find 24 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-inch ball valve

Fits this model
B656

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies B656 at find 54 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

240V three-stage low-amp vacuum motor

Fits this model
C304LA

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies C304LA at find 95 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
  • The exact 230V/50Hz equipment drawing calls for a 240V C304LA motor; confirm the machine nameplate, supply, installed motor label, current, connector, discharge, and mounting before service.
View part details →

230V 220 PSI diaphragm pump

Fits this model
C323D

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies C323D at find 28 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Electrical harness

Fits this model
E366

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies E366 in the Items not shown for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Normally open mechanical float switch

Fits this model
E373

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies E373 at find 91 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

35A two-position rocker switch replacing E515

Fits this model
E536

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies E536 at find 81 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
  • The drawing lists discontinued E515; Mytee separately identifies E536 as its replacement. Confirm the installed terminal pattern, wiring, and current rating before service.
View part details →

Two-inch vacuum-stack foam filter

Fits this model
G003

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G003 at find 73 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Closed-cell neoprene vacuum-motor gasket without adhesive

Fits this model
G004

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G004 at find 96 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Piglet nylon debris filters, 25-pack

Fits this model
G008

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G008 in the Items not shown for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
  • The BOM quantity is an installed callout and does not redefine the current 25-filter retail package.
View part details →

Speedster Solution Tank Lid

Fits this model
G018

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G018 at find 45 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Buna Washer 3/16″

Fits this model
G052

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G052 at find 33 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Vacuum Tank 7″ Lid

Fits this model
G090

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G090 at find 75 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Gasket 7″

Fits this model
G091

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G091 at find 76 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

1.9-inch screen-mesh filter

Fits this model
G097

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G097 at find 72 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Relay cover

Fits this model
G165

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies G165 at find 12 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

C-clip

Fits this model
H042

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H042 at find 10 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-20 by four-inch zinc hex bolt

Fits this model
H096

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H096 at find 93 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

10-inch replacement wheel

Fits this model
H109

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H109 at find 9 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Rubber faucet fill adapter

Fits this model
H178

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H178 at find 44 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

10-32 by three-quarter-inch black stainless countersunk Phillips screw

Fits this model
H186

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H186 at find 14 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-20 by three-quarter-inch stainless hex-head bolt

Fits this model
H202

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H202 at find 35 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Flat Washer 1/4″

Fits this model
H210

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H210 at find 4 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-inch-ID by one-inch-OD stainless flat washer

Fits this model
H211

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H211 at find 34 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-inch stainless lock washer

Fits this model
H213

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H213 at find 40 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-20 stainless hex nut

Fits this model
H215

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H215 at find 41 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Quarter-20 stainless nylon-insert lock nut

Fits this model
H216

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H216 at find 3 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Hose clamp 2.25″

Fits this model
H217

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H217 at find 38 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Electrical strain-relief fitting

Fits this model
H220

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H220 at find 16 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →

Half-inch steel electrical lock nut

Fits this model
H221

Revision Revision 22.6; current manufacturer-linked 230V/50Hz parts drawing with AH206 replacement note dated June 2022. Serial range not recorded.

  • The official manufacturer parts list identifies H221 at find 17 for 1000DX-200 Speedster extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1000DX-200 Speedster 230V/50Hz parts drawing, revision 22.6.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party parts list.
  • Confirm the full 1000DX-200 nameplate, 230V/50Hz supply, installed revision, find-number or items-not-shown location, connection details, and required quantity before ordering.
View part details →