WE HAVE ALL PARTSCommercial equipment partsFind a part

Parts for this equipment

Mytee 1001DX-200 Speedster heated extractor, 230 V / 50 Hz parts

Check the listed revision, serial range, voltage, and connector before ordering.

Two-inch elbow inlet assembly

Fits this model
A926

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies A926 at find 86 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

14.5-inch solution hose with male swivel and female threaded ends

Fits this model
AH184

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies AH184 at find 37 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Speedster accessory bundle

Fits this model
AK-SPH

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies AK-SPH in the Items not shown for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass female quick disconnect with 1/4-inch FPT

Fits this model
B102

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B102 at find 71 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

1/4-inch brass male-to-female street elbow

Fits this model
B103

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B103 at find 30 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

1/4-inch brass hex nipple

Fits this model
B107

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B107 at find 77 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch barb to 1/4-inch MPT adapter

Fits this model
B109

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B109 at find 22 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch swivel-barb to FPT adapter with gasket

Fits this model
B110

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B110 at find 40 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

1/4-inch brass tee

Fits this model
B113

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B113 at find 24 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass check valve with 1/4-inch MPT ends

Fits this model
B116

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B116 at find 36 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

500 PSI brass relief valve

Fits this model
B118

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B118 at find 23 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Half-inch FPT stainless-mesh strainer

Fits this model
B119A

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B119A at find 79 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass tee with three 1/4-inch MPT ends

Fits this model
B135

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B135 at find 70 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

1/4-inch brass female-thread coupling

Fits this model
B142

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B142 at find 41 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass adapter with 1/2-inch barb

Fits this model
B160

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B160 at find 47 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/2-inch barb

Fits this model
B172

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B172 at find 49 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

3/8-inch 90-degree brass street elbow

Fits this model
B186

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B186 at find 45 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/4-inch FPT ends

Fits this model
B207

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B207 at find 31 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Hex Bushing 1/2″

Fits this model
B210

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B210 at find 80 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Close Nipple 3/8″

Fits this model
B216

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B216 at find 81 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Brass 3/8-inch barb to 1/4-inch MPT adapter

Fits this model
B241

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B241 at find 65 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Open-flow brass female quick disconnect with 1/4-inch FPT

Fits this model
B259A

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B259A at find 32 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Open-flow brass male quick disconnect with 1/4-inch MPT

Fits this model
B260A

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B260A at find 33 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

90-degree brass 3/8-inch to 1/4-inch MPT elbow

Fits this model
B652

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B652 at find 42 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Quarter-inch ball valve

Fits this model
B656

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies B656 at find 72 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

240V three-stage low-amp vacuum motor

Fits this model
C304LA

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies C304LA at find 112 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

230V 220 PSI diaphragm pump

Fits this model
C323D

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies C323D at find 44 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Normally open mechanical float switch

Fits this model
E373

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E373 at find 107 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

250V red heater indicator light

Fits this model
E511

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E511 at find 103 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Three-position rocker switch

Fits this model
E516

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E516 at find 102 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

230V 1,000W heating rod

Fits this model
E520

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E520 at find 26 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

35A two-position rocker switch replacing E515

Fits this model
E536

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E536 at find 104 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

200°F automatic thermostat with vertical quick connects

Fits this model
E573

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E573 at find 27 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

310°F manual thermostat with vertical quick connects

Fits this model
E574

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E574 at find 28 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

1001DX electrical harness

Fits this model
E996

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies E996 in the Items not shown for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Closed-cell neoprene vacuum-motor gasket without adhesive

Fits this model
G004

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies G004 at find 113 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Speedster Solution Tank Lid

Fits this model
G018

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies G018 at find 63 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Buna Washer 3/16″

Fits this model
G052

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies G052 at find 53 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Vacuum Tank 7″ Lid

Fits this model
G090

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies G090 at find 94 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Gasket 7″

Fits this model
G091

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies G091 at find 93 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

1.9-inch screen-mesh filter

Fits this model
G097

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies G097 at find 90 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

C-clip

Fits this model
H042

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H042 at find 17 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Quarter-20 by four-inch zinc hex bolt

Fits this model
H096

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H096 at find 110 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

10-inch replacement wheel

Fits this model
H109

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H109 at find 16 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Two-inch female vinyl Cuff-Lynx starter

Fits this model
H124V

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H124V at find 57 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Two-inch male vinyl Cuff-Lynx starter

Fits this model
H135V

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H135V at find 98 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

8-32 nylon-insert lock nut

Fits this model
H146

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H146 at find 6 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →

Rubber faucet fill adapter

Fits this model
H178

Revision Manufacturer-linked four-page drawing, revision 2.25, dated March 14, 2025. Serial range not recorded.

  • The official manufacturer parts list identifies H178 at find 64 for 1001DX-200 Speedster heated extractor, 230 V / 50 Hz.
  • This relationship applies only to the manufacturer-linked 1001DX-200 Speedster 230V/50Hz revision 2.25 drawing.
  • Do not extend this relationship to the separately published 115V/60Hz configuration without its exact first-party drawing.
  • Confirm the full 1001DX-200 nameplate, 230V/50Hz supply, both circuits, installed revision, find-number or items-not-shown location, plug and connection details, and required quantity before ordering.
View part details →