WE HAVE ALL PARTSCommercial equipment partsFind a part

Parts for this equipment

Mytee 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) parts

Check the listed revision, serial range, voltage, and connector before ordering.

Four-inch Air Lite upholstery tool

Fits this model
8400P

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies 8400P in the items not shown for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

15-foot 1.25-inch vacuum and solution hose combo

Fits this model
8501

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies 8501 in the items not shown for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch elbow inlet assembly

Fits this model
A926

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies A926 at find 72 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

3/8-inch gray hose with female and female-swivel ends

Fits this model
AH156

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies AH156 at find 15 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

14.5-inch solution hose with male swivel and female threaded ends

Fits this model
AH184

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies AH184 at find 24 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass female quick disconnect with 1/4-inch FPT

Fits this model
B102

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B102 at find 60 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass male-to-female street elbow

Fits this model
B103

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B103 at find 16 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass hex nipple

Fits this model
B107

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B107 at find 65 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch barb to 1/4-inch MPT adapter

Fits this model
B109

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B109 at find 26 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch swivel-barb to FPT adapter with gasket

Fits this model
B110

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B110 at find 29 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass tee

Fits this model
B113

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B113 at find 30 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Half-inch FPT stainless-mesh strainer

Fits this model
B119A

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B119A at find 66 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass female-thread coupling

Fits this model
B142

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B142 at find 22 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

One PSI quarter-inch-MPT piston check valve

Fits this model
B148

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B148 at find 23 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass adapter with 1/2-inch barb

Fits this model
B160

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B160 at find 36 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/2-inch barb

Fits this model
B172

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B172 at find 41 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

3/8-inch 90-degree brass street elbow

Fits this model
B186

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B186 at find 37 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/4-inch FPT ends

Fits this model
B207

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B207 at find 14 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Hex Bushing 1/2″

Fits this model
B210

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B210 at find 67 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Close Nipple 3/8″

Fits this model
B216

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B216 at find 68 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass 3/8-inch to 1/4-inch MPT elbow

Fits this model
B652

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies B652 at find 39 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

240V three-stage low-amp vacuum motor

Fits this model
C304LA

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies C304LA at find 94 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
  • The 230V equipment drawing labels the component itself 240V. Treat this as a nominal component rating and confirm the complete machine and motor nameplates before service.
View part details →

230V 220 PSI diaphragm pump

Fits this model
C323D

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies C323D at find 33 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

230V 1,000W heating rod

Fits this model
E520

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies E520 at find 19 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

200°F automatic thermostat with vertical quick connects

Fits this model
E573

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies E573 at find 20 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

310°F manual thermostat with vertical quick connects

Fits this model
E574

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies E574 at find 18 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Electrical harness for HP120 Grand Prix

Fits this model
E999

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies E999 in the items not shown for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Closed-cell neoprene vacuum-motor gasket without adhesive

Fits this model
G004

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G004 at find 90 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Speedster Solution Tank Lid

Fits this model
G018

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G018 at find 54 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Buna Washer 3/16″

Fits this model
G052

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G052 at find 51 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Single Heatguard hose wrap

Fits this model
G079

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G079 in the items not shown for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Vacuum Tank 7″ Lid

Fits this model
G090

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G090 at find 81 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Gasket 7″

Fits this model
G091

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G091 at find 82 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1.9-inch screen-mesh filter

Fits this model
G097

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies G097 at find 79 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

C-clip

Fits this model
H042

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H042 at find 9 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 by four-inch zinc hex bolt

Fits this model
H096

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H096 at find 93 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

10-inch replacement wheel

Fits this model
H109

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H109 at find 8 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch female vinyl Cuff-Lynx starter

Fits this model
H124V

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H124V at find 47 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch male vinyl Cuff-Lynx starter H135D

Fits this model
H135D

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H135D at find 83 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 by one-and-one-quarter-inch stainless hex-head bolt

Fits this model
H203

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H203 at find 49 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Flat Washer 1/4″

Fits this model
H210

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H210 at find 4 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-inch-ID by one-inch-OD stainless flat washer

Fits this model
H211

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H211 at find 50 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-inch stainless lock washer

Fits this model
H213

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H213 at find 52 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 stainless hex nut

Fits this model
H215

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H215 at find 53 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 stainless nylon-insert lock nut

Fits this model
H216

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H216 at find 3 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Hose clamp 2.25″

Fits this model
H217

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H217 at find 45 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1.5-inch drain valve

Fits this model
H225

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H225 at find 69 for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

45-degree drain spout

Fits this model
H226

Revision Manufacturer-linked four-sheet drawing, revision 2.24. Serial range not recorded.

  • The official manufacturer parts list identifies H226 in the items not shown for 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230).
  • This relationship applies only to 2008CS-230 Contractor's Special 220 PSI heated extractor package, 230 V / 50 Hz (2008CS-230) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →