WE HAVE ALL PARTSCommercial equipment partsFind a part

Parts for this equipment

Mytee 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) parts

Check the listed revision, serial range, voltage, and connector before ordering.

25-foot 1.5-inch vacuum and solution hose combo

Fits this model
8100

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies 8100 in the items not shown for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

12-inch dual-jet stainless-steel carpet wand

Fits this model
8300-EZ

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies 8300-EZ in the items not shown for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Four-inch Air Lite upholstery tool

Fits this model
8400P

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies 8400P in the items not shown for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V 2,000W heater assembly rated to 3,000 PSI

Fits this model
A902

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies A902 at find 25 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch elbow inlet assembly

Fits this model
A926

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies A926 at find 69 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

14.5-inch solution hose with male swivel and female threaded ends

Fits this model
AH184

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies AH184 at find 22 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass female quick disconnect with 1/4-inch FPT

Fits this model
B102

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B102 at find 51 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass male-to-female street elbow

Fits this model
B103

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B103 in the main find 27 and A902 heater subassembly item 1 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
  • The source repeats this identifier in distinct placements. Confirm the exact location and installed quantity being serviced.
View part details →

1/4-inch brass hex nipple

Fits this model
B107

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B107 at find 62 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch barb to 1/4-inch MPT adapter

Fits this model
B109

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B109 at find 17 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass tee

Fits this model
B113

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B113 at find 19 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass check valve with 1/4-inch MPT ends

Fits this model
B116

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B116 at find 21 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Half-inch FPT stainless-mesh strainer

Fits this model
B119A

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B119A at find 58 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

3/8-inch brass filter adapter

Fits this model
B121

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B121 at find 59 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass tee with three 1/4-inch MPT ends

Fits this model
B135

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B135 at find 50 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass female-thread coupling

Fits this model
B142

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B142 at find 28 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Nut 1/4″ NPT

Fits this model
B156

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B156 at find 107 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/2-inch barb

Fits this model
B172

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B172 at find 33 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Half-inch-ID by one-inch ferrule

Fits this model
B174

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B174 at find 26 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/4-inch FPT ends

Fits this model
B207

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B207 in the main find 20 and A902 heater subassembly item 4 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
  • The source repeats this identifier in distinct placements. Confirm the exact location and installed quantity being serviced.
View part details →

Close Nipple 3/8″

Fits this model
B216

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B216 at find 60 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with half-inch barb and 3/8-inch FPT

Fits this model
B236

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B236 at find 105 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 3/8-inch barb to 1/4-inch MPT adapter

Fits this model
B241

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B241 at find 40 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Open-flow brass female quick disconnect with 1/4-inch FPT

Fits this model
B259A

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B259A in the A902 heater subassembly item 2 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Open-flow brass male quick disconnect with 1/4-inch MPT

Fits this model
B260A

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B260A in the A902 heater subassembly item 3 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

350 PSI Relief Valve

Fits this model
B542

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B542 at find 18 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass 3/8-inch to 1/4-inch MPT elbow

Fits this model
B652

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B652 at find 29 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-inch ball valve

Fits this model
B656

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies B656 at find 52 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V three-stage low-amp tangential vacuum motor

Fits this model
C302LA

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies C302LA at find 95 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V 220 PSI diaphragm pump

Fits this model
C322D

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies C322D at find 31 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

50-foot 12/3 extension cord with female twist-lock and Type B plug

Fits this model
E351A

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E351A in the items not shown for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Normally closed mechanical float switch

Fits this model
E374

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E374 at find 91 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

250V red heater indicator light

Fits this model
E511

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E511 at find 86 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

125V blue separate-circuit indicator light

Fits this model
E512B

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E512B at find 89 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V 1,000W heating rod

Fits this model
E519

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E519 in the A902 heater subassembly item 6 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

35A two-position rocker switch replacing E515

Fits this model
E536

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E536 at find 87 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V audible circuit-light controller

Fits this model
E564

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E564 at find 109 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

200°F automatic thermostat with vertical quick connects

Fits this model
E573

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E573 in the A902 heater subassembly item 8 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

310°F manual thermostat with vertical quick connects

Fits this model
E574

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E574 in the A902 heater subassembly item 7 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Electrical harness for HP120 Grand Prix

Fits this model
E999

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies E999 in the items not shown for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Closed-cell neoprene vacuum-motor gasket without adhesive

Fits this model
G004

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G004 at find 96 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Piglet nylon debris filters, 25-pack

Fits this model
G008

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G008 in the items not shown for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Buna Washer 3/16″

Fits this model
G052

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G052 at find 46 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1003DX solution-tank lid

Fits this model
G067

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G067 at find 42 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Vacuum Tank 7″ Lid

Fits this model
G090

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G090 at find 73 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Gasket 7″

Fits this model
G091

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G091 at find 72 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1.9-inch screen-mesh filter

Fits this model
G097

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G097 at find 77 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Buna valve gasket for Mytee Dry handtool

Fits this model
G105

Revision Manufacturer-linked five-sheet drawing, revision 11/2025. Serial range not recorded.

  • The official manufacturer parts list identifies G105 at find 108 for 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS).
  • This relationship applies only to 2008CS Contractor's Special 220 PSI heated extractor package, 115 V / 60 Hz (2008CS) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →