Parts for this equipment

Mytee 8070 Mytee Lite extractor parts

Check the listed revision, serial range, voltage, and connector before ordering.

8070 pump not working or spraying poorly

Identify the symptom before choosing a replacement. Mytee’s 8070 manual, page 14 distinguishes these problems:

  • No water after the heater was switched on first: vapor lock may be the cause. Turn the heater off and let the machine cool completely, then follow the startup sequence in section 2.4. Prime the pump before switching on the heater.
  • Poor spray: the manual identifies a clogged jet or solution line as possible causes. Follow its cleaning instructions before replacing the pump.
  • Continuous running or pulsing with poor flow: a solution-line leak or pump-switch problem may be involved. A Mytee service center can diagnose the fault.

Unplug before adjustments or repairs. Do not adjust the pump pressure-switch set screw. Leave electrical testing to a qualified service technician.

For this 115V Rev K configuration, the manufacturer’s parts drawing identifies C305, the 120 PSI demand pump, at callout 58. Match the nameplate, installed pump label and connections before ordering. The 230V version uses a separate parts list.

Use Mytee’s older-model archive for earlier machines. Ask us to identify the part with the nameplate and pump-label photos, plus a description of the symptom.

Four-inch Air Lite upholstery tool

Fits this model
8400P

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies 8400P in the Items not shown for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
  • The manufacturer lists 8400P as included with the 8070 package; this does not make it an internal machine component.
View part details →

15-foot 1.25-inch vacuum and solution hose combo

Fits this model
8501

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies 8501 in the Items not shown for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
  • The manufacturer lists 8501 as included with the 8070 package; this does not make it an internal machine component.
View part details →

Recovery-tank drain hose for Mytee Lite

Fits this model
A110

Revision not recorded. Serial range not recorded.

  • The manufacturer states that A110 is the recovery-tank drain hose for the Mytee Lite.
  • Confirm the complete model and revision before ordering.
  • Confirm the recovery-tank outlet, hose length, and installed clamp or connection.
View part details →

115V 1,000W heater assembly rated to 3,000 PSI

Fits this model
A901

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies A901 at find 59 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

8070 Mytee Lite operating manual

Fits this model
ADM-8070

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies ADM-8070 in the Items not shown for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

10-inch solution hose

Fits this model
AH106

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies AH106 at find 61 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

14.5-inch solution hose with male swivel and female threaded ends

Fits this model
AH184

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies AH184 at find 53 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Brass female quick disconnect with 1/4-inch FPT

Fits this model
B102

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B102 at find 69 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass male-to-female street elbow

Fits this model
B103

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B103 at find 21 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

3/8-inch brass hex bushing

Fits this model
B105

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B105 at find 49 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass hex nipple

Fits this model
B107

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B107 at find 66 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch barb to 1/4-inch MPT adapter

Fits this model
B109

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B109 at find 64 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch swivel-barb to FPT adapter with gasket

Fits this model
B110

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B110 at find 48 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass filter adapter

Fits this model
B112

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B112 at find 24 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

1/4-inch brass tee

Fits this model
B113

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B113 at find 62 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Brass check valve with 1/4-inch MPT ends

Fits this model
B116

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B116 at find 54 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Quarter-inch FPT stainless-mesh strainer

Fits this model
B119

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B119 at find 23 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

45-degree brass street elbow with 1/4-inch MPT and FPT

Fits this model
B130

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B130 at find 25 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

1/4-inch 90-degree brass elbow

Fits this model
B152

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B152 at find 50 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Half-inch-ID by one-inch ferrule

Fits this model
B174

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B174 at find 51 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/4-inch FPT ends

Fits this model
B207

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B207 at find 60 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Brass 3/8-inch barb to 1/4-inch MPT adapter

Fits this model
B241

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B241 at find 30 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Open-flow brass female quick disconnect with 1/4-inch FPT

Fits this model
B259A

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B259A at find 55 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Open-flow brass male quick disconnect with 1/4-inch MPT

Fits this model
B260A

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies B260A at find 56 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

120V three-stage peripheral-discharge vacuum motor specified for 8070 115V Rev K

Fits this model
C302P

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • Confirm the full 8070 model designation, machine nameplate, installed motor label, three-stage motor, peripheral discharge, mounting pattern, and connector before ordering.
  • The current Rev K 115V list identifies C302P as a 120V component at find 28 with one installed.
  • The 120V component label and 115V equipment-list configuration are nominal designations in the same official document; do not infer compatibility from either voltage label alone.
  • Do not extend this relationship to the separately published 230V configuration.
  • Electrical service requires qualified personnel and exact nameplate, connector, mounting, and airflow confirmation.
View part details →

115V 120 PSI demand pump

Fits this model
C305

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies C305 at find 58 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

115V 1,000W heating rod

Fits this model
E519

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies E519 in the A901 heater subassembly for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

35A two-position rocker switch replacing E515

Fits this model
E536

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies E536 at find 42 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

200°F automatic thermostat with vertical quick connects

Fits this model
E573

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies E573 in the A901 heater subassembly for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

310°F manual thermostat with vertical quick connects

Fits this model
E574

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies E574 in the A901 heater subassembly for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Electrical harness for 8070 Mytee Lite

Fits this model
E997

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • Confirm model 8070, voltage, revision, heater configuration, connector count and keying, wire gauge, routing, and installed harness label before ordering.
  • The current Rev K 115V list identifies E997 as the 8070 electrical harness in Items not shown.
  • Do not extend this relationship to the separately published 230V configuration.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, connector keying, routing, and required quantity before ordering or service.
View part details →

Closed-cell neoprene vacuum-motor gasket without adhesive

Fits this model
G004

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G004 at find 27 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

2.5″ Tethered Cap

Fits this model
G036

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G036 at find 5 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Tether for cap

Fits this model
G055

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G055 at find 9 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Rubber bumper with 7/8-inch by 1/4-inch head

Fits this model
G068

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G068 at find 47 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Single Heatguard hose wrap

Fits this model
G079

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G079 in the Items not shown for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Quarter-inch-NPT bulkhead gasket

Fits this model
G221

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G221 at find 70 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Starter cuff gasket

Fits this model
G223

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies G223 at find 71 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Number-10 by half-inch stainless Plastite screw

Fits this model
H029

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H029 at find 39 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

C-clip

Fits this model
H042

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H042 at find 37 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Two-inch to 1.25-inch vinyl Cuff-Lynx reducer

Fits this model
H122V

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H122V in the Items not shown for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

1.25-inch hose Cuff-Lynx male-and-female connector

Fits this model
H133

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H133 in the Items not shown for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Two-inch male vinyl Cuff-Lynx starter

Fits this model
H135V

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H135V at find 1 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Rubber faucet fill adapter

Fits this model
H178

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H178 at find 29 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Quarter-20 by half-inch stainless hex-head bolt

Fits this model
H201

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H201 at find 18 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Quarter-20 by one-and-one-quarter-inch stainless hex-head bolt

Fits this model
H203

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H203 at find 14 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Flat Washer 1/4″

Fits this model
H210

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H210 at find 15 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →

Quarter-inch stainless lock washer

Fits this model
H213

Revision Rev K, current manufacturer PDF 8070-4-30-2026. Serial range not recorded.

  • The official manufacturer parts list identifies H213 at find 17 for 8070 Mytee Lite extractor.
  • This relationship applies only to the current manufacturer-linked 8070 Mytee Lite 115V parts list, Rev K.
  • Do not extend this relationship to the separately published 230V configuration without its exact first-party parts list.
  • Confirm the full 8070 nameplate, 115V supply, installed revision, find-number or subassembly location, connection details, and required quantity before ordering.
View part details →