Parts for this equipment

Mytee HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) parts

Check the listed revision, serial range, voltage, and connector before ordering.

10-inch single-jet stainless-steel carpet wand

Fits this model
8390-EZ

Revision Current Mytee HP90 product record observed September 9, 2026. Serial range not recorded.

  • The current manufacturer statement supports use with the 115V HP90 product page only.
  • The HP90 published package separately lists the 8501 hose and 8400P tool. This relationship does not claim that 8390-EZ is included with HP90.
  • Do not extend this relationship to HP90-230, other extractors, another hose or connector configuration, or a different equipment revision without exact manufacturer documentation.
  • Confirm the HP90 nameplate, supply voltage, hose and solution connection interfaces, pressure and flow, and the complete wand before ordering or use.
View part details →

115V 1,200W heater assembly rated to 3,000 PSI

Fits this model
A907

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies A907 at find 54 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch elbow inlet assembly

Fits this model
A926

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies A926 at find 85 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

14.5-inch solution hose with male swivel and female threaded ends

Fits this model
AH184

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies AH184 at find 42 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass female quick disconnect with 1/4-inch FPT

Fits this model
B102

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B102 at find 1 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass male-to-female street elbow

Fits this model
B103

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B103 in the main find 19 and A907 heater subassembly item 4 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass hex nipple

Fits this model
B107

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B107 at find 22 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch barb to 1/4-inch MPT adapter

Fits this model
B109

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B109 at find 49 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 1/4-inch swivel-barb to FPT adapter with gasket

Fits this model
B110

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B110 at find 36 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass filter adapter

Fits this model
B112

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B112 at find 18 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass tee

Fits this model
B113

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B113 at find 51 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass check valve with 1/4-inch MPT ends

Fits this model
B116

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B116 at find 52 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-inch FPT stainless-mesh strainer

Fits this model
B119

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B119 at find 15 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

45-degree brass street elbow with 1/4-inch MPT and FPT

Fits this model
B130

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B130 at find 20 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch brass female-thread coupling

Fits this model
B142

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B142 at find 53 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1/4-inch 90-degree brass elbow

Fits this model
B152

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B152 at find 39 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Nut 1/4″ NPT

Fits this model
B156

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B156 at find 71 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Half-inch-ID by one-inch ferrule

Fits this model
B174

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B174 at find 41 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

90-degree brass elbow with 1/4-inch FPT ends

Fits this model
B207

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B207 in the A907 heater subassembly item 1 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Brass 3/8-inch barb to 1/4-inch MPT adapter

Fits this model
B241

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B241 at find 10 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Open-flow brass female quick disconnect with 1/4-inch FPT

Fits this model
B259A

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B259A in the main find 43 and A907 heater subassembly item 3 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Open-flow brass male quick disconnect with 1/4-inch MPT

Fits this model
B260A

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies B260A in the main find 44 and A907 heater subassembly item 2 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V three-stage low-amp tangential vacuum motor

Fits this model
C302LA

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies C302LA at find 90 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V 120 PSI demand pump

Fits this model
C305

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies C305 at find 46 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Normally open mechanical float switch

Fits this model
E373

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E373 at find 70 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

25-foot blue-lighted male 12/3 SJTW power cord

Fits this model
E531

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E531 at find 95 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

35A two-position rocker switch replacing E515

Fits this model
E536

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E536 at find 66 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V 600W half-inch heating rod

Fits this model
E571

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E571 in the A907 heater subassembly item 7 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

200°F automatic thermostat with vertical quick connects

Fits this model
E573

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E573 in the A907 heater subassembly item 8 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

310°F manual thermostat with vertical quick connects

Fits this model
E574

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E574 in the A907 heater subassembly item 6 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

115V relay for vacuum shut-off float switch

Fits this model
E632

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies E632 at find 63 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Closed-cell neoprene vacuum-motor gasket without adhesive

Fits this model
G004

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G004 at find 87 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

HP90 solution-tank lid

Fits this model
G019

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G019 at find 8 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Buna Washer 3/16″

Fits this model
G052

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G052 at find 5 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Vacuum Tank 7″ Lid

Fits this model
G090

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G090 at find 80 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Gasket 7″

Fits this model
G091

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G091 at find 79 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1.9-inch screen-mesh filter

Fits this model
G097

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G097 at find 83 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Buna valve gasket for Mytee Dry handtool

Fits this model
G105

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G105 at find 72 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-inch-NPT bulkhead gasket

Fits this model
G221

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G221 at find 17 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

1.5-inch PVC bulkhead gasket

Fits this model
G222

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G222 at find 74 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Starter cuff gasket

Fits this model
G223

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies G223 at find 91 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 by four-inch zinc hex bolt

Fits this model
H096

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H096 at find 89 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch female vinyl Cuff-Lynx starter

Fits this model
H124V

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H124V at find 31 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Two-inch male vinyl Cuff-Lynx starter

Fits this model
H135V

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H135V at find 92 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Rubber faucet fill adapter

Fits this model
H178

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H178 at find 11 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

10-32 by three-quarter-inch black stainless countersunk Phillips screw

Fits this model
H186

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H186 at find 65 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 by half-inch stainless hex-head bolt

Fits this model
H201

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H201 at find 23 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →

Quarter-20 by three-quarter-inch stainless hex-head bolt

Fits this model
H202

Revision Production release 9.25 dated September 22, 2025; drawing title block 01/2026. Serial range not recorded.

  • The official manufacturer parts list identifies H202 at find 60 for HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90).
  • This relationship applies only to HP90 Stingray heated automotive detail extractor, 115 V / 60 Hz (HP90) in the exact manufacturer-linked drawing.
  • Do not extend this relationship to the other voltage configuration without its exact first-party parts list.
  • Confirm the complete equipment nameplate, voltage, frequency, installed revision, find-number or subassembly location, component markings, connection details, and required quantity before ordering.
View part details →