Prochem Apex GTX diesel truckmount (1.001-140.0) parts

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86191310 at find Engine - Diesel ref 9 for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• The diesel table retains the WG972 pulley description. Confirm the installed marking, shaft, key, hub, belt plane, alignment, fasteners and torque before ordering.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86191420 at find Fuel Pump - Diesel ref 7 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• Diesel fuel-pump section. Confirm pump marking, voltage, inlet and return routing, mounting, filtration and vehicle fuel-system compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86191530 at find Coolant System ref 7 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the coolant subsystem, not a public selling package.
• Coolant-system service requires qualified shutdown, full cooling, pressure release, coolant recovery, hose and clamp inspection, leak testing, air purging and current engine coolant procedures.
• Do not infer interchangeability with radiators, bottles, hoses or brackets from other Prochem truckmounts.
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 engine.
• Confirm radiator marking, engine configuration, dimensions, inlet and outlet positions, cap and overflow interfaces, fan and shroud clearance, mounts and vehicle airflow.
• Radiator replacement requires complete cooling-system recovery, refill, purge and leak testing.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86191660 at find Pressure Regulator ref 8 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm regulator marking, pressure range, flow direction, ports, adjustment and current manufacturer service instructions.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86191740 at find Control Panel - Gas ref 13; Diesel ref 15 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• The gas and diesel control-panel tables both identify this relay. Confirm coil rating, contact logic, socket or terminals and shutdown-circuit wiring.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192210 at find Solution Outlet ref 23 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• The manufacturer says this screen is included with assembly 86192240; verify whether a separate replacement is needed.
• Confirm orientation, mesh condition and manifold generation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192240 at find Solution Outlet ref 7 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• The manufacturer says this screen assembly includes references 22 and 23; do not add the O-ring and check-valve screen as mandatory extra purchases.
• Confirm manifold generation, screen orientation, O-ring condition and pressure isolation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192380 at find Water Box ref 22 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm mating float valve 86195060, sealing face, and installed orientation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192390 at find Solution Outlet ref 25 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• The manufacturer says this seat is included with complete check valve 86195030; verify whether a separate replacement is needed.
• Confirm sealing face, orientation and mating poppet.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192490 at find Solution Outlet ref 6 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm temperature scale, thread, electrical connection, gauge compatibility and hot-system isolation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192510 at find Engine - Diesel ref 8 for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Confirm sensor marking, thread, electrical connection, trip logic and protected circuit.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86192950 at find Control Panel - Diesel not shown for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• Diesel model only. Confirm linkage stack order, spacer dimensions, attachment and free movement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193210 at find Control Panel - Diesel not shown for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• Diesel model only. Do not stretch or substitute the spring; confirm linkage, anchor points and full return operation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193230 at find Vacuum Pump ref 13 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Do not stretch or substitute the spring; confirm relief-valve assembly and operating adjustment.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193260 at find Solution Outlet ref 28 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• The manufacturer says this spring is included with complete check valve 86195030; verify whether a separate replacement is needed.
• Do not stretch or substitute the spring; confirm orientation and mating components.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193280 at find Heat Exchanger - Exhaust ref 23 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine serial number, Kubota D902 engine and diesel exhaust configuration.
• Do not stretch or substitute the spring. Confirm all published dimensions, rate or function, paired positions and documented two-spring arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193340 at find Engine - Diesel ref 26 for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Diesel model only. Confirm voltage, rotation, pinion, mounting, cable terminals, ground path and engine ring gear.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193400 at find Engine - Diesel not shown for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Diesel model only. Confirm stop geometry, shim 86278120, linkage, governed-speed procedure and full throttle return.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193440 at find Water Box ref 8 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm thread, screen condition, flow direction, and documented two-piece installed quantity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193490 at find Solution Outlet ref 5 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm screen mesh, housing, seals, flow direction and pressure isolation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193540 at find 60 Gallon Waste Tank ref 3 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• Confirm strainer opening, orientation, retention and debris-clearance requirements before replacement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193750 at find Control Panel - Gas ref 12; Diesel ref 14 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• The gas and diesel control-panel tables both identify two of these switches. Confirm the two circuit functions, contact blocks, keying and wiring diagram.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193760 at find Control Panel - Gas ref 11; Diesel ref 13 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• The gas and diesel control-panel tables both identify this switch. Confirm contact blocks, bypass function, keying and wiring diagram.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193870 at find 60 Gallon Waste Tank ref 10 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• This assembly participates in waste-tank overfill protection; confirm sensor orientation, wiring, switch logic, mounting and complete shutdown function after service.
• Do not bypass the shutoff switch.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86193880 at find Control Panel - Diesel ref 12 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• Diesel model only. Confirm switch positions, keyway, terminals, glow-plug function and Kubota wiring.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86194160 at find Chemical Panel ref 5 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm thread standard, port orientation, pressure rating and chemical compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86194180 at find Pressure Regulator ref 7 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm thread standard, service-port function, cap, sealing and pressure rating.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86194250 at find Solution Outlet ref 26 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• The manufacturer says this seat is included with complete check valve 86195030; verify whether a separate replacement is needed.
• Confirm material, orientation and sealing faces.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86194340 at find Engine - Diesel ref 6 for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Confirm thermostat marking, diameter, bypass or jiggle-valve orientation, gasket and coolant specification.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195030 at find Solution Outlet ref 4 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• The manufacturer says this complete valve includes references 24 through 30; do not add those seven components as mandatory extra purchases.
• Confirm assembly direction, pressure rating, seat condition and all included components.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195050 at find Chemical Panel ref 8 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm valve direction, adjustment, seals, flow range and chemical compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195060 at find Water Box ref 6 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm valve body, seat, rod, inlet interface, and shutoff operation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195160 at find Chemical Panel ref 14 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm port orientation, handle position, seals, pressure rating and chemical compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195170 at find Solution Outlet ref 3 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm port size, pressure and temperature ratings, flow direction and handle clearance.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195340 at find Water Box ref 5 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm relief rating, thread, orientation, and discharge path; never defeat the temperature-relief function.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86195590 at find Coolant System ref 6 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the coolant subsystem, not a public selling package.
• Coolant-system service requires qualified shutdown, full cooling, pressure release, coolant recovery, hose and clamp inspection, leak testing, air purging and current engine coolant procedures.
• Do not infer interchangeability with radiators, bottles, hoses or brackets from other Prochem truckmounts.
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 engine.
• Confirm inside and outside diameters from the installed stack, elastomer condition, radiator isolation position and documented four-washer arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86202180 at find 60 Gallon Waste Tank ref 21 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• Confirm nozzle marking, thread, spray pattern, orientation and intended tank-cleaning function; do not substitute by connection size alone.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86228990 at find Heat Exchanger - Exhaust ref 22 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine serial number, Kubota D902 engine and diesel exhaust configuration.
• Confirm both diameters, flange geometry, shaft or pivot fit, material, lubrication requirement and documented two-bearing arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86233110 at find Coolant System ref 18 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the coolant subsystem, not a public selling package.
• Coolant-system service requires qualified shutdown, full cooling, pressure release, coolant recovery, hose and clamp inspection, leak testing, air purging and current engine coolant procedures.
• Do not infer interchangeability with radiators, bottles, hoses or brackets from other Prochem truckmounts.
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 engine.
• Confirm hose outside diameter and clamp range, material, coolant and temperature compatibility, both locations and tightening procedure.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86233390 at find Pressure Regulator ref 6 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm hose or tube outside diameter, cushion material, mounting and documented three-clamp arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86246890 at find Control Panel - Gas ref 9; Diesel ref 11 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• The gas and diesel control-panel tables both identify this meter. Confirm supply voltage, polarity, mounting and accumulated-hour handling.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86247680 at find Solution Outlet ref 2 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm thread standard, material, sealing method and documented two-piece installed quantity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86247720 at find Chemical Panel ref 10 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0; do not substitute a gas-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm thread standard, material, sealing method, chemical compatibility and documented two-nipple arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86272720 at find 60 Gallon Waste Tank ref 20 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• Confirm exact thread, installed function, sealing method and that a solid plug is appropriate at this location.
• The official manufacturer parts list identifies 86272720 at find Engine - Diesel ref 7 for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• The diesel-engine table documents two plugs. Confirm exact threads, locations, functions and sealing method; do not substitute by nominal size alone.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86278120 at find Engine - Diesel not shown for Apex GTX diesel truckmount (1.001-140.0).
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 diesel engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the diesel-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Diesel model only. Confirm shim thickness, throttle-stop stack, governed-speed procedure and that current manufacturer guidance requires this shim.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86278380 at find Coolant System ref 2 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the coolant subsystem, not a public selling package.
• Coolant-system service requires qualified shutdown, full cooling, pressure release, coolant recovery, hose and clamp inspection, leak testing, air purging and current engine coolant procedures.
• Do not infer interchangeability with radiators, bottles, hoses or brackets from other Prochem truckmounts.
• Apply this relationship only to Apex GTX diesel model 1.001-140.0 with the documented Kubota D902 engine.
• Confirm shoulder diameter and length, thread, material, radiator mounting stack, isolators, torque and documented two-bolt arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86282410 at find Fuel Pump - Diesel ref 22 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• Diesel fuel-return circuit. Confirm fuel rating, route, heat and abrasion protection, clamps and actual cut length.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86282480 at find Fuel Pump - Diesel ref 23 for Apex GTX diesel truckmount (1.001-140.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX diesel model 1.001-140.0.
• Confirm the complete machine data label and serial number before service.
• Diesel model only. The manual says to cut this six-foot supply hose into the required lengths; confirm routing, heat and abrasion protection, clamps and actual cut plan.