Prochem Apex GTX gas truckmount (1.001-139.0) parts

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86282810 at find Fuel Pump - Gas not shown for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Gas fuel-pump section. Confirm loom diameter, cut length, routing, heat protection and documented two-sleeve arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86297070 at find Chemical Panel ref 15 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm all three port functions, handle positions, seals, pressure rating and chemical compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86297540 at find Solution Pump ref 3 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm 20 mm plunger configuration, pump model, kit contents, pressure isolation, and seal orientation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86297550 at find Solution Pump ref 6 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm pump model, plunger dimensions, installed three-plunger set, seal condition, and pressure isolation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86297560 at find Solution Pump ref 8 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm pump model, retainer orientation, seal stack, and documented three-piece installed quantity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86297570 at find Solution Pump ref 9 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm pump model, ring orientation, seal stack, and documented three-piece installed quantity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86298280 at find Control Panel - Gas ref 3; Diesel ref 4 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0.
• Confirm the complete machine data label and serial number before service.
• The gas and diesel control-panel tables both identify this breaker. Confirm circuit function, terminals, mounting and wire protection before replacement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86300440 at find Solution Pump ref 10 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm thread, length, oil level marking, and vent function; do not substitute a sealed plug.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86313690 at find Heat Exchanger-Cores ref 2 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm gasket material, core-cover geometry, hot-surface compatibility, and documented three-piece installed quantity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86318100 at find Engine - Gas ref 28 for Apex GTX gas truckmount (1.001-139.0).
• Apply this relationship only to Apex GTX gas model 1.001-139.0 with the documented Kubota WG972 gasoline engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the gas-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Confirm thermostat marking, installed circuit, diameter, orientation, gasket and engine cooling configuration; do not substitute the separate 180-degree thermostat.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86318530 at find 60 Gallon Waste Tank ref 12 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• Use only with the documented 60-gallon lid geometry; confirm gasket profile, full sealing surface and even lid compression.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86318560 at find 60 Gallon Waste Tank ref 13 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• The table documents two outlet gaskets; confirm both sealing positions, material condition, outlet geometry and vacuum integrity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86318840 at find Heat Exchanger-Cores ref 1 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm core material, port orientation, pressure rating, exhaust and coolant interfaces, and leak-test procedure.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86323700 at find 60 Gallon Waste Tank ref 18 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• Confirm inlet geometry, gasket profile, sealing surfaces and vacuum integrity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86324090 at find Chemical Panel ref 16 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm panel geometry, valve and flowmeter mounting, labels, hose routing and installed controls.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86334370 at find Coolant System ref 1 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the coolant subsystem, not a public selling package.
• Coolant-system service requires qualified shutdown, full cooling, pressure release, coolant recovery, hose and clamp inspection, leak testing, air purging and current engine coolant procedures.
• Do not infer interchangeability with radiators, bottles, hoses or brackets from other Prochem truckmounts.
• Apply this relationship only to Apex GTX gas model 1.001-139.0 with the documented Kubota WG972 engine.
• Confirm panel geometry, radiator and shroud clearance, mounting pattern, airflow sealing and service access.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86334380 at find Control Panel - Gas ref 2 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0.
• Confirm the complete machine data label and serial number before service.
• Gas model only. Confirm panel geometry, every mounted control and gauge, harness interfaces and current label 86409290.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86335230 at find Fuel Pump - Gas ref 9 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Gas fuel-pump section. Confirm housing geometry, pump fit, mounting, ventilation and vehicle installation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86335240 at find Fuel Pump - Gas ref 10 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Gas fuel-pump section. Confirm cover geometry, housing 86335230, fasteners, ventilation and vehicle installation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86338980 at find Heat Exchanger - Exhaust ref 13 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm plate geometry, gasket 86338990, mounting pattern, orientation and heat shielding.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86338990 at find Heat Exchanger - Exhaust ref 12 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm cover geometry, gasket profile and material, complete sealing surface and hot-exhaust compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339000 at find Heat Exchanger - Exhaust ref 11 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm glide profile, material, orientation, door clearance and documented two-glide arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339010 at find Heat Exchanger - Exhaust ref 10 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm spacer dimensions, material, stack order, paired positions and documented two-spacer arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339020 at find Heat Exchanger - Exhaust ref 9 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm door geometry, sealing edge, glides, spacers, rod interface, housing and complete open and closed travel.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339030 at find Heat Exchanger - Exhaust ref 8 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm rod length, end geometry, cover, spacer, gasket, linkage and free door travel.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339040 at find Heat Exchanger - Exhaust ref 7 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm lever orientation, pivot, linkage, spring, door travel and safe heat-bypass operation.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339070 at find Heat Exchanger - Exhaust ref 6 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm bracket geometry, paired positions, pivot alignment, fasteners and documented two-bracket arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339080 at find Heat Exchanger - Exhaust ref 5 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm rod length, end geometry, adjustment, pivot connections and full bypass-door travel.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86339630 at find Fuel Pump - Gas ref 24 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, pressure, hot-water and chemical service requires qualified procedures and complete pressure, temperature and chemical isolation.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Gas fuel-pump section. Confirm flow direction, hose sizes, fuel compatibility, clamps and installed position.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86340090 at find Vacuum Pump ref 2 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm exhaust interface, thread, heat shielding, and blower configuration.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86341350 at find Heat Exchanger - Exhaust ref 4 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm tube geometry, housing interfaces, gasket positions, exhaust direction, heat shielding and sealing.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86341400 at find Heat Exchanger - Exhaust - Gas ref 35 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Gas model only. Confirm catalytic-converter and housing interfaces, tube geometry, flange and gasket positions, heat shielding, routing and exhaust sealing.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86342360 at find Engine - Gas ref 13 for Apex GTX gas truckmount (1.001-139.0).
• Apply this relationship only to Apex GTX gas model 1.001-139.0 with the documented Kubota WG972 gasoline engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the gas-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Gas model only. Confirm the complete engine data plate, emissions package, harness, controls, exhaust, cooling, mounts, pulleys and vehicle compliance before replacement.
• Complete engine replacement requires qualified lifting and commissioning.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86342380 at find Heat Exchanger - Exhaust - Gas ref 14 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Gas model only. Confirm catalytic configuration, Kubota WG972 exhaust interfaces, housing geometry, heat shielding, bypass mechanism and complete sealing.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86342900 at find Heat Exchanger - Exhaust ref 3 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm lever geometry, grip, linkage rod, pivot, bypass-door travel and adjustment range.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86348200 at find Water Box ref 1 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm float dimensions, free movement, rod interface, and hot-water compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86348230 at find Heat Exchanger - Exhaust ref 2 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm glide profile, material, lever interface, orientation and documented two-glide arrangement.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86348240 at find Heat Exchanger - Exhaust ref 1 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the applicable exhaust heat-exchanger subsystem, not a public selling package.
• Exhaust heat-exchanger service requires qualified shutdown, cooling, exhaust and fuel isolation, hot-surface protection, ventilation, linkage adjustment, sealing and post-service leak and function checks.
• Do not interchange the gas catalytic housing or tube with the diesel housing.
• Apply this relationship only to Apex GTX gas model 1.001-139.0.
• Confirm the complete machine serial number, Kubota WG972 engine and catalytic exhaust configuration.
• Confirm brace-tube length, attachment points, lever alignment and heat clearance.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86349600 at find Control Panel - Gas not shown for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount electrical, control, fuel and engine-interface service requires qualified procedures, complete electrical and fuel isolation, and leak or function testing.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0.
• Confirm the complete machine data label and serial number before service.
• Gas model only. Confirm material, length, routing, connections and choke-control function.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86350410 at find Vacuum Pump ref 1 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm relief-valve stack order and 408 blower configuration.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86350790 at find 60 Gallon Waste Tank ref 22 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the 60-gallon waste-tank subsystem, not a public selling package.
• Do not apply this relationship to a 100-gallon tank or another truckmount solely because a component appears dimensionally similar.
• Waste-tank service requires the machine to be shut down, cooled, depressurized and isolated from vacuum, electrical and liquid hazards before work begins.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0 when the installed waste tank is the documented 60-gallon assembly 98409630.
• Confirm the complete machine data label, serial number, waste-tank capacity and installed tank assembly before service.
• Confirm whether the complete lid assembly rather than bare lid 86410190 is required, including sensor, inlet, outlet, gasket and latch interfaces.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86353020 at find Vacuum Pump ref 3 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm diameter, length, clamp interfaces, exhaust temperature, and routing.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86359340 at find Engine - Gas ref 21 for Apex GTX gas truckmount (1.001-139.0).
• Apply this relationship only to Apex GTX gas model 1.001-139.0 with the documented Kubota WG972 gasoline engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the gas-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Gas model only. Confirm emissions configuration, inlet and outlet flanges, heat shielding, exhaust routing and applicable vehicle or emissions requirements.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86361310 at find Solution Pump ref 11 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm HTS pump model, rod diameter, seal orientation, and documented three-piece installed quantity.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86361320 at find Solution Pump ref 12 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm HTS pump model, sight-glass design, elastomer, groove condition, and oil compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86361330 at find Solution Pump ref 13 for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• Confirm HTS pump model, crankcase generation, elastomer, groove condition, and oil compatibility.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86361480 at find Vacuum Pump ref 21A for Apex GTX gas truckmount (1.001-139.0).
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• Keep the instructions supplied with any installed service or option kit because those instructions may publish alternate replacement numbers.
• The listed quantity is the quantity documented in that subsystem, not a public selling package.
• Truckmount fuel, rotating-drive, pressure, hot-water, exhaust, and blower service requires qualified procedures.
• Apply this relationship only to the Apex GTX gas model 1.001-139.0; do not substitute a diesel-only part.
• Confirm the complete machine data label and serial number before service.
• The parts list explicitly marks this as the gas-model belt; do not use diesel belt 86361490.
• Replace and tension the documented matched two-belt set and confirm pulley alignment and guarding.

Revision 86410230-T (2017-05-01). Serial range not recorded.

• The official manufacturer parts list identifies 86364000 at find Engine - Gas ref 19 for Apex GTX gas truckmount (1.001-139.0).
• Apply this relationship only to Apex GTX gas model 1.001-139.0 with the documented Kubota WG972 gasoline engine.
• The parts list says serial applicability can depend on reference markers; no missing serial cutover is inferred.
• The listed quantity is the quantity documented in the gas-engine subsystem, not a public selling package.
• Engine, exhaust, fuel-adjacent, cooling, belt-drive and electrical service requires a qualified technician, complete shutdown, cooling, battery and fuel isolation, ventilation, guarding and post-service leak or function checks.
• Gas engine table. Confirm flange pattern, thickness, gasket stack, catalytic-converter position, alignment and fastener torque.