02-01514 now points to 113464. Match the equipment model, revision, serial range, voltage, and connector.

• The official manufacturer parts list identifies 113464 in the electrical-enclosure assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
• Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
• Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
• Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
• Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
• The official manufacturer parts list identifies 113464 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Verify cord diameter, panel opening, retention, wiring, and qualified electrical service before installation.
• The official 125310C electrical-box BOM identifies 113464 as a black 0.370-inch by 0.13-inch strain relief.
• Confirm cable diameter, panel thickness, opening, and retention method.
• Confirm compatibility with the power cord and current parts-list revision before ordering.