03-00126 now points to 103276. Match the equipment model, revision, serial range, voltage, and connector.

• The official manufacturer parts list identifies 103276 at find 22 for DrizAir 1200 dehumidifier (104677 / F203-A, 115V, R410A).
• Apply this fitment only to DrizAir 1200 model 104677/F203-A units whose nameplate and refrigerant label state 115V and R410A.
• Do not use this relationship for the separately documented R32 version.
• Confirm the find-number location and current service-list revision before ordering.
• The official manufacturer parts list identifies 103276 in the Blower-assembly detail table for HVE 3000 flood pumper (107977 / F479, 115V).
• Apply this fitment only to HVE 3000 model 107977/F479 units whose nameplate states 115V.
• Confirm the installed assembly, unit serial context, manufacture date when relevant, legacy marking, and current service-list revision before ordering.
• Disconnect both power cords, drain and decontaminate the unit, and follow qualified service procedures before opening the machine.
• The official manufacturer parts list identifies 103276 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
• Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
• Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
• Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
• Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
• The official manufacturer parts list identifies 103276 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A, manufactured before March 2022).
• Apply this relationship only to Dri-Eaz LGR 6000Li model 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a manufacture date before March 2022.
• Do not extend this relationship to equipment governed by parts list 125298E, to any R32 machine, or to equipment whose date code and refrigerant label cannot be confirmed.
• Suffixless and S-suffixed service numbers are separate manufacturer identifiers. Do not infer equivalence, supersession, or interchangeability without explicit evidence.
• Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
• Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
• The official manufacturer parts list identifies 103276 in the February 2021 service-parts table for Rover HVE ride-on extractor (112125 / F354, 115V).
• The manufacturer service UOM describes the service-list ordering unit and does not establish how many are installed in one machine.
• Apply this relationship only to Dri-Eaz Rover HVE equipment 112125/F354 with a 115V nameplate.
• Do not extend these relationships to F292 or another extractor. The readable copy contains an inconsistent inherited F292 footer that conflicts with the official 112125/F354 identity and is rejected.
• The February 2021 table establishes an installed-base service relationship but does not assert current stock, current service availability, installed quantity, or interchangeability.
• Confirm the full equipment nameplate, serial, installed legacy or current marking, physical location, dimensions or connector, and current manufacturer service record before ordering.
• Unplug the machine and allow stored electrical energy to dissipate before opening the control box. Electrical and drive-component work requires qualified service and current manufacturer procedures.