Parts for this equipment

Dri-Eaz LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E) parts

Check the listed revision, serial range, voltage, and connector before ordering.

LGR 6000Li galvanized-steel base

Fits this model
101345

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 101345 in the base-gasket detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

0.390-inch-ID black split nylon bushing

Fits this model
102175

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 102175 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

55 uF 370V round capacitor with mounting bracket

Fits this model
102544

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 102544 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

6 uF 440V run capacitor

Fits this model
102545

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 102545 in the electrical-box and circuit-board assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • The same physical capacitor appears in the electrical-box and circuit-board detail tables; the catalog does not double its installed quantity.
View part details →

5/16-18 x 3/8 x 1.25-inch shoulder bolt

Fits this model
102651S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 102651S in the LG compressor assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

115V LG 8600 R410A compressor terminal cover

Fits this model
103147

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 103147 in the LG compressor assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

0.671-inch-ID black split nylon bushing

Fits this model
103276

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 103276 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

One-foot blue Cat 5e patch-cable assembly

Fits this model
103292

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 103292 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Six-inch nylon cable tie

Fits this model
103298

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 103298 in the refrigeration, circuit-board, and blower assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E specifies five in the refrigeration assembly, two in the circuit-board assembly, and five in the blower detail.
View part details →

LGR 6000Li submersible-pump tank cover

Fits this model
103475

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 103475 in the pump-tank assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Black nylon dust cap for 12-inch wheel

Fits this model
103879

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 103879 in the wheel-hub assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Black powder-coated wire filter shroud for LGR 6000Li

Fits this model
104565

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 104565 in the cover detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

LGR 6000Li ABS electrical-box cover

Fits this model
105006

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105006 in the electrical-enclosure assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

1/4-inch-barb female quick-disconnect body

Fits this model
105025

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105025 in the hose detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

3/8-inch-barb male quick-disconnect insert

Fits this model
105026

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105026 in the refrigeration, back-panel, and pump-tank assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E shows this insert in the refrigeration, back-panel, and pump-tank views. Confirm whether a service task requires one or more before ordering.
View part details →

115V LG 8600 R410A compressor terminal gasket

Fits this model
105183

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105183 in the LG compressor assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

LGR 6000Li condenser-base PVC pressure-sensitive-adhesive gasket

Fits this model
105385

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105385 in the refrigeration assembly base-gasket detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Submersible-pump quick-disconnect body and check valve

Fits this model
105603

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105603 in the pump-tank assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

LGR 6000Li polyethylene back panel

Fits this model
105865

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 105865 in the back-panel assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Two-inch by 0.13-inch cork-tape insulation

Fits this model
106557

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 106557 in the LG compressor assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Neoprene and EPDM pressure-sensitive-adhesive pump-cord seal gasket

Fits this model
106644

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 106644 in the pump-tank assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

0.375 x 0.125-inch closed-cell equipment gasket

Fits this model
106646

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 106646 in the refrigeration and condensate-tray assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E specifies 65 inches in the refrigeration assembly and 0.542 foot in the condensate-tray detail.
View part details →

Half-inch square PVC pressure-sensitive-adhesive gasket

Fits this model
106650

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 106650 in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

EPDM pump-cover seal gasket

Fits this model
106727

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 106727 in the pump-tank assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

250 mm LGR 6000Li motorized-impeller bracket

Fits this model
108050

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 108050 in the blower detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

LGR 6000Li badge label

Fits this model
108904

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 108904 in the cover detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Dehumidifier operating-instructions label

Fits this model
108953

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 108953 in the electrical-enclosure assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

115V LG 8600 R410A compressor terminal-cover nut

Fits this model
109653

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 109653 in the LG compressor assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

115V two-speed high-voltage circuit-board assembly

Fits this model
109831

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 109831 in the circuit-board assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

3/8-inch-ID green hose clamp

Fits this model
110192

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 110192 in the hose detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

5/8-inch zinc-plated steel spring hose clamp

Fits this model
110196S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 110196S in the refrigeration and back-panel assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E specifies two in the refrigeration assembly and one in the back-panel assembly.
View part details →

#8-32 zinc-plated nut with star washer

Fits this model
111307S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 111307S in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

5/8-11 UNC thin zinc-plated nut

Fits this model
111311S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 111311S in the wheel-hub assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

115V LG 8600 R410A compressor overload

Fits this model
111567

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 111567 in the LG compressor assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Nylon cable-tie push mount

Fits this model
111584

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 111584 in the refrigeration and electrical-box assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E specifies four in the refrigeration assembly and one in the electrical-box assembly.
View part details →

3/16 x 1/4-inch zinc-plated steel rivet

Fits this model
111944S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 111944S in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

3/16 x 3/8-inch tri-fold aluminum rivet

Fits this model
112013S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112013S in the cover detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

3/16 x 5/8-inch tri-fold aluminum rivet

Fits this model
112015S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112015S in the back-panel assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

#8 x 1/2-inch black zinc-plated Phillips screw

Fits this model
112358S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112358S in the cover detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

#8 x 1/2-inch stainless Phillips truss-head screw

Fits this model
112360S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112360S in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

#10-24 x 3/8-inch serrated zinc-plated hex-washer-head screw

Fits this model
112439S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112439S in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

#10 x 5/8-inch high-low black Phillips screw

Fits this model
112499S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112499S in the back-panel and electrical-enclosure assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E specifies four in the back-panel assembly and two in the electrical enclosure.
View part details →

#6 x 1/2-inch high-low black Phillips screw

Fits this model
112505S

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112505S in the electrical-enclosure assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

36-inch SHT31 temperature and relative-humidity sensor assembly

Fits this model
112574

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112574 in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Black ABS impeller shroud for LGR 6000Li

Fits this model
112746

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 112746 in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

120V 50/60Hz LGR 6000Li speed controller

Fits this model
113059

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 113059 in the electrical-box assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Split magnetic float switch

Fits this model
113355

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 113355 in the pump-tank assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →

Black 0.370-inch strain relief

Fits this model
113464

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required. Serial range not recorded.

  • The official manufacturer parts list identifies 113464 in the electrical-enclosure assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
View part details →