MANUFACTURER PART NUMBER110196SLegend Brands, Inc.
Part confirmed

110196S 5/8-inch zinc-plated steel spring hose clamp

Dri-Eaz part 110196S is the 5/8-inch zinc-plated steel spring hose clamp identified in the refrigeration and back-panel assemblies in the official LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E) service-parts list. The BOM specifies 3 each on equipment. Confirm 103614/F600 identity, 115V and R410A nameplates, March 2022-or-later date code, serial, installed marking, location, connector or dimensions, quantity, and current service-list revision before ordering.

BUYING STATUSPRICE CHECKASK FOR CURRENT PRICE AND STOCK
Part numberConfirmed
FitsLGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E) / Rev 125298E; manufacturing date March 2022-present; R410A nameplate required
PurchasePrice check needed
Check price and stock
CHECK BEFORE ORDERING

Confirm the exact equipment version

Part confirmed

Part confirmed

The manufacturer part number and item match the documentation. Check the equipment fit separately.

SELLERPRICE CHECKAsk for current price and stock
01

Part numbers

1 numbers
Current MPN110196S
Other numbers110196S
Prior numbersNone listed
02

Equipment fit

1 model
Fits this model

Dri-Eaz LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E)

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required

Check this model →
  • The official manufacturer parts list identifies 110196S in the refrigeration and back-panel assemblies for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
  • Parts list 125298E specifies two in the refrigeration assembly and one in the back-panel assembly.
03

Specifications

7 details
Component type
5/8-inch zinc-plated steel spring hose clamp
Parts-list assembly
refrigeration and back-panel assemblies
BOM quantity
3 each on equipment
Hose diameter
5/8 in
Type
Spring clamp
Material
Steel
Finish
Zinc plated
04

Documentation

2 references
01

Reference

Legend Brands LGR 6000Li spare-parts list 125298E

The official manufacturer parts list identifies 110196S in the refrigeration and back-panel assemblies as 5/8-inch zinc-plated steel spring hose clamp, with BOM quantity 3 each on equipment for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
02

Reference

Legend Brands LGR 6000Li manual revision F

The manufacturer separately documents R32 equipment under 103614/F600, proving that the model identifier and manufacture date cannot replace direct refrigerant-nameplate confirmation.
05

Price and availability

Price check needed
No seller is ready for purchase

Ask us to check current price and stock.

Ask about this part →