WE HAVE ALL PARTSCommercial equipment partsFind a part
MANUFACTURER PART NUMBER114467SLegend Brands, Inc.
Part confirmed

114467S M4 x 8 mm zinc-plated Nylock Phillips screw

Dri-Eaz part 114467S is the m4 x 8 mm zinc-plated nylock phillips screw documented in official manufacturer service parts for 3 equipment records. Review the equipment-specific fitment, revision, quantity, and ordering constraints below before ordering.

BUYING STATUSPRICE CHECKASK FOR CURRENT PRICE AND STOCK
Part numberConfirmed
Fits3 equipment models – choose yours below
PurchasePrice check needed
Check price and stock
CHECK BEFORE ORDERING

Confirm the exact equipment version

Part confirmed

Part confirmed

The manufacturer part number and item match the documentation. Check the equipment fit separately.

SELLERPRICE CHECKAsk for current price and stock
01

Part numbers

1 numbers
Current MPN114467S
Other numbers114467S
Prior numbersNone listed
02

Equipment fit

3 models
Fits this model

Dri-Eaz DrizAir 1400 dehumidifier (127890, 115V, R32)

Revision Parts list 128386B; manufacturing date January 2025 to present

Check this model →
  • The official manufacturer parts list identifies 114467S in the exterior, chassis, coil/blower, and high-voltage assemblies for DrizAir 1400 dehumidifier (127890, 115V, R32).
  • Apply this relationship only to DrizAir 1400 equipment MPN 127890 with a 115V nameplate, R32 label, and manufacture date January 2025 or later.
  • Accept date code 25A or later. The final date-code letter maps A through L to January through December; hold an unreadable or missing label for manual review.
  • Do not extend this BOM to historical identifier 127727, pre-January-2025 equipment, DrizAir 1200, or another dehumidifier family.
  • Confirm the installed marking, physical location, required quantity, connector where applicable, and current manufacturer instructions before ordering.
Fits this model

Dri-Eaz LGR 5000Li dehumidifier (127690, 115V, R32)

Revision Parts list 129002A; manufacturing date October 2025 to present

Check this model →
  • The official manufacturer parts list identifies 114467S in the housing, chassis, coil/blower, and high-voltage assemblies for LGR 5000Li dehumidifier (127690, 115V, R32).
  • Apply this relationship only to LGR 5000Li equipment MPN 127690 with a 115V nameplate, R32 label, and manufacture date October 2025 or later.
  • Do not extend this BOM to pre-October-2025 equipment. Require the machine label and manufacture date when the generation cannot otherwise be established.
  • Do not cross-fit this relationship to LGR 6000Li, LGR 7000XLi, Revolution LGR, DrizAir 1400, or another dehumidifier unless that exact model has its own evidence-backed fitment.
  • Confirm the installed marking, physical location, required quantity, connector where applicable, and current manufacturer instructions before ordering.
Fits this model

Dri-Eaz LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E)

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required

Check this model →
  • The official manufacturer parts list identifies 114467S in the blower detail for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
03

Specifications

9 details
Component type
Nylock Phillips screw
Thread and length
M4 x 8 mm
Finish
Zinc plated
DrizAir 1400 dehumidifier BOM quantity
4 exterior; 3 chassis; 5 coil/blower; 2 high-voltage each by assembly
DrizAir 1400 dehumidifier parts-list assembly
exterior, chassis, coil/blower, and high-voltage assemblies
LGR 5000Li dehumidifier BOM quantity
4 housing; 3 chassis; 5 coil/blower; 2 high-voltage each by assembly
LGR 5000Li dehumidifier parts-list assembly
housing, chassis, coil/blower, and high-voltage assemblies
LGR 6000Li dehumidifier BOM quantity
4 each on equipment
LGR 6000Li dehumidifier parts-list assembly
blower detail
04

Documentation

6 references
01

Reference

Legend Brands DrizAir 1400 parts list 128386B

The official manufacturer parts list identifies 114467S in the exterior, chassis, coil/blower, and high-voltage assemblies as m4 x 8 mm zinc-plated nylock phillips screw, with BOM quantity 4 exterior; 3 chassis; 5 coil/blower; 2 high-voltage each by assembly for DrizAir 1400 dehumidifier (127890, 115V, R32).
02

Reference

Legend Brands DrizAir 1400 manual 0925B

The current manufacturer manual confirms 127890, 115V, R32, service warnings, and the equipment date-code scheme.
03

Reference

Legend Brands LGR 5000Li parts list 129002A

The official manufacturer parts list identifies 114467S in the housing, chassis, coil/blower, and high-voltage assemblies as m4 x 8 mm zinc-plated nylock phillips screw, with BOM quantity 4 housing; 3 chassis; 5 coil/blower; 2 high-voltage each by assembly for LGR 5000Li dehumidifier (127690, 115V, R32).
04

Reference

Legend Brands LGR 5000Li manual 0925B

The current manufacturer manual confirms 127690, 115V, R32, service warnings, filter requirements, and the equipment date-code location.
05

Reference

Legend Brands LGR 6000Li spare-parts list 125298E

The official manufacturer parts list identifies 114467S in the blower detail as m4 x 8 mm zinc-plated nylock phillips screw, with BOM quantity 4 each on equipment for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
06

Reference

Legend Brands LGR 6000Li manual revision F

The manufacturer separately documents R32 equipment under 103614/F600, proving that the model identifier and manufacture date cannot replace direct refrigerant-nameplate confirmation.
05

Price and availability

Price check needed
No seller is ready for purchase

Ask us to check current price and stock.

Ask about this part →