03-00131 now points to 106508. Match the equipment model, revision, serial range, voltage, and connector.

• The official manufacturer parts list identifies 106508 in the base assembly for DriForce XL specialty air mover (124159, 115V, June 2021 to present).
• Apply this relationship only to Dri-Eaz DriForce XL equipment 124159 with a 115V nameplate and a date code of June 2021 or later governed by spare-parts list 125318A.
• Do not extend this fitment to an older DriForce base unit, a different voltage, or equipment whose installed hardware is not represented by list 125318A.
• Confirm the complete nameplate, serial and date code, installed marking, physical location, required quantity, connector or thread where applicable, and current manufacturer instructions before ordering.
• Disconnect power before service. Motor-control, mains-power, and blower work requires qualified service and current manufacturer procedures.
• The official manufacturer parts list identifies 106508 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• The official 125310C lower-housing BOM specifies four 106508 rubber feet.
• Confirm 3/16-inch ID, 1.25-inch OD, 5/8-inch height, and mounting interface.
• Confirm quantity, housing generation, and current parts-list revision before ordering.