WE HAVE ALL PARTSCommercial equipment partsFind a part
MANUFACTURER PART NUMBER106508Legend Brands, Inc.
Part confirmed

106508 Round black rubber foot, 3/16 x 1.25 x 5/8 in

Dri-Eaz part 106508 is the round black rubber foot documented in official manufacturer service parts for the exact Velo 2-Speed, Velo Pro, and DriForce XL equipment generations recorded below. Confirm dimensions, mounting, required quantity, equipment identity, manufacture-date gate, and ordering constraints before ordering.

BUYING STATUSPRICE CHECKASK FOR CURRENT PRICE AND STOCK
Part numberConfirmed
Fits3 equipment models – choose yours below
PurchasePrice check needed
Check price and stock
CHECK BEFORE ORDERING

Confirm the exact equipment version

Part confirmed

Part confirmed

The manufacturer part number and item match the documentation. Check the equipment fit separately.

SELLERPRICE CHECKAsk for current price and stock
01

Part numbers

2 numbers
Current MPN106508
Other numbers106508
02

Equipment fit

3 models
Fits this model

Dri-Eaz DriForce XL specialty air mover (124159, 115V, June 2021 to present)

Revision 125318A; manufacturing date June 2021 to present

Check this model →
  • The official manufacturer parts list identifies 106508 in the base assembly for DriForce XL specialty air mover (124159, 115V, June 2021 to present).
  • Apply this relationship only to Dri-Eaz DriForce XL equipment 124159 with a 115V nameplate and a date code of June 2021 or later governed by spare-parts list 125318A.
  • Do not extend this fitment to an older DriForce base unit, a different voltage, or equipment whose installed hardware is not represented by list 125318A.
  • Confirm the complete nameplate, serial and date code, installed marking, physical location, required quantity, connector or thread where applicable, and current manufacturer instructions before ordering.
  • Disconnect power before service. Motor-control, mains-power, and blower work requires qualified service and current manufacturer procedures.
Fits this model

Dri-Eaz Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded)

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation

Check this model →
  • The official manufacturer parts list identifies 106508 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
  • Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
  • Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
  • Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
  • Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
03

Specifications

14 details
Component type
Round rubber foot
Legacy identifier
03-00131
Dimensions
3/16 in ID x 1.25 in OD x 5/8 in
Material
Rubber
Color
Black
DriForce XL specialty air mover BOM quantity
6 each on equipment
DriForce XL specialty air mover parts-list assembly
base assembly
Velo 2-Speed low-profile air mover BOM quantity
4 each on equipment
Velo 2-Speed low-profile air mover parts-list assembly
lower housing
Inside diameter
3/16 in
Outside diameter
1.25 in
Height
5/8 in
Assembly location
Lower housing assembly
Document
125310C, page 3
04

Documentation

6 references
01

Reference

Legend Brands DriForce XL spare-parts list 125318A

The official manufacturer parts list identifies 106508 in the base assembly as round black rubber foot for velo pro air mover, mapped from 03-00131, with BOM quantity 6 each on equipment for DriForce XL specialty air mover (124159, 115V, June 2021 to present).
02

Reference

Legend Brands DriForce XL manual 125465A

The manufacturer manual confirms equipment 124159, 115V operation, service warnings, and the machine checks required before selecting a replacement part.
03

Reference

Legend Brands Velo injection-molded parts list 125311D

The official manufacturer parts list identifies 106508 in the lower housing as round black rubber foot for velo pro air mover, mapped from 03-00131, with BOM quantity 4 each on equipment for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
04

Reference

Manufacturer documentation

Used to confirm the published part details.
05

Reference

Legend Brands Velo Pro spare-parts list 125310C

Page 3 specifies four 106508 round black rubber feet with 3/16-inch ID, 1.25-inch OD, and 5/8-inch height.
06

Reference

Manufacturer documentation

Used to confirm the published part details.
05

Price and availability

Price check needed
No seller is ready for purchase

Ask us to check current price and stock.

Ask about this part →