Dri-Eaz Velo Pro low-profile air mover (F505, 115V) parts

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 101431 as the motorized impeller blower assembly.
• Confirm 115V, frequency, connector, 190W rating, 1600 RPM, and single-speed configuration.
• Confirm model F505, impeller geometry, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 101978 as the right kickstand bracket.
• Confirm right-hand orientation, wireform interface, and mounting points.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 102541 as a 16 µF 250V capacitor with mounting bracket.
• Confirm capacitance, voltage, tolerance, frequency, terminals, case size, and bracket.
• Treat the capacitor as potentially charged and use qualified electrical service personnel.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM specifies two 102724 handle-mounting clips.
• Confirm clip geometry, handle interface, and mounting point.
• Confirm quantity, housing generation, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 102770 as a 12A snap-in thermal circuit breaker.
• Confirm voltage rating, trip behavior, reset style, panel cutout, terminals, and approvals.
• Verify the protective-device specification against current service documentation before installation.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 102775 as the cable clamp.
• Confirm 0.38-inch width, 0.25-inch ID, cable diameter, and mounting point.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM specifies four 106508 rubber feet.
• Confirm 3/16-inch ID, 1.25-inch OD, 5/8-inch height, and mounting interface.
• Confirm quantity, housing generation, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 108049 as the left kickstand bracket.
• Confirm left-hand orientation, wireform interface, and mounting points.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 110446 as the Velo speed-controller PCBA.
• Confirm model F505, 115V board revision, connector pinout, and control interface.
• Confirm firmware or calibration requirements and use qualified electrical service personnel.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 111834 as a 15A receptacle with GFCI.
• Confirm voltage, current rating, line and load terminals, mounting, and regulatory approvals.
• Verify wiring against current service documentation and use qualified electrical personnel.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM specifies six 112015S rivets.
• Confirm 3/16 x 5/8-inch size, tri-fold form, and aluminum body and mandrel.
• Confirm quantity, installation location, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C main-assembly BOM specifies two 112599 screws.
• Confirm M5 x 14 mm thread and length, Phillips head profile, and zinc-plated finish.
• Confirm installation location and the current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 112673S as a #10-24 x 1-inch serrated HWH screw.
• Confirm thread, length, head, serrations, zinc-plated finish, and any grounding role.
• Confirm installation location and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C BOM specifies seventeen 112676S screws in the main assembly and five in the lower-housing assembly.
• Confirm #10-16 x 3/4-inch high-low thread, Phillips head, and black zinc-plated finish.
• Confirm assembly location, required quantity, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 113464 as a black 0.370-inch by 0.13-inch strain relief.
• Confirm cable diameter, panel thickness, opening, and retention method.
• Confirm compatibility with the power cord and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM specifies two 114104S rivets.
• Confirm 3/16 x 1/2-inch size, aluminum body and mandrel, and black anodized finish.
• Confirm quantity, installation location, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 115632 as the kickstand wireform.
• Confirm wireform geometry and both bracket interfaces.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C main-assembly BOM identifies 117210 as the black inlet grille.
• Do not substitute the outlet grille; confirm airflow side and mounting points.
• Confirm model F505, housing generation, and the current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 117248 as the grab handle with lifting strap.
• Confirm handle geometry, strap, and mounting points.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 117873 as the Velo control-panel label.
• Confirm model, voltage, regulatory market, control layout, and label content.
• Confirm adhesive surface and current parts-list revision before ordering or application.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 117938 as the Velo QR product label.
• Confirm the complete model, regulatory market, and serial-label requirements.
• Confirm label content and current parts-list revision before ordering or application.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM specifies four 119416S screws.
• Confirm M6 x 18 mm thread and length, HWH head, Nylock feature, and manufacturer finish code.
• Confirm the exact installation location and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 119709 as a round SPST rocker switch.
• Confirm electrical rating, terminals, cutout, markings, and 115V application.
• Confirm wiring against the current service documentation and use qualified electrical personnel.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 121229 as an 18-foot 14/3 SJTW power-cord assembly with 5-15P plug.
• Confirm 115V model, cord rating, plug, conductor count, grounding, and strain-relief interface.
• Confirm regulatory market and have electrical installation performed by qualified personnel.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 122905 as the outlet grille.
• Confirm the F505 model, grille location, and mounting points.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 123051S as a #10-24 nut with star washer.
• Confirm thread, captured-washer construction, and zinc-plated finish.
• Confirm required quantity, installation location, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C BOM uses 123076S in both the main and electrical-box assemblies.
• Confirm 5/32 x 1/4-inch size, tri-fold construction, aluminum materials, and black finish.
• Confirm assembly location, required quantity, and the current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C main-assembly BOM specifies two 123124S screws.
• Confirm M5 x 16 mm thread and length, Phillips head profile, and Nylock feature.
• Confirm installation location and the current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C main-assembly BOM identifies 123272 as the Fisher blue top housing.
• Confirm model F505 and the mating lower-housing generation.
• Confirm mounting points and the current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C lower-housing BOM identifies 123273 as the bottom housing.
• Confirm the F505 model and 115V configuration.
• Confirm the housing generation and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 124343 as the bottom enclosure.
• Confirm enclosure position and mating 124347 115V enclosure.
• Confirm mounting pattern, model, regulatory market, and current parts-list revision before ordering.

Revision 125310C. Serial range not recorded.

• The official 125310C electrical-box BOM identifies 124347 as the 115V enclosure.
• Confirm 115V model, enclosure position, and mating 124343 bottom enclosure.
• Confirm mounting pattern, regulatory market, and current parts-list revision before ordering.