WE HAVE ALL PARTSCommercial equipment partsFind a part
MANUFACTURER PART NUMBER112676SLegend Brands, Inc.
Part confirmed

112676S #10-16 x 3/4-inch high-low Phillips screw

Dri-Eaz part 112676S is the #10-16 x 3/4-inch high-low phillips screw documented in official manufacturer service parts for 3 equipment records. Review the equipment-specific fitment, revision, quantity, and ordering constraints below before ordering.

BUYING STATUSPRICE CHECKASK FOR CURRENT PRICE AND STOCK
Part numberConfirmed
Fits3 equipment models – choose yours below
PurchasePrice check needed
Check price and stock
CHECK BEFORE ORDERING

Confirm the exact equipment version

Part confirmed

Part confirmed

The manufacturer part number and item match the documentation. Check the equipment fit separately.

SELLERPRICE CHECKAsk for current price and stock
01

Part numbers

1 numbers
Current MPN112676S
Other numbers112676S
Prior numbersNone listed
02

Equipment fit

3 models
Fits this model

Dri-Eaz DrizAir 1400 dehumidifier (127890, 115V, R32)

Revision Parts list 128386B; manufacturing date January 2025 to present

Check this model →
  • The official manufacturer parts list identifies 112676S in the lower housing, wheels, and axle for DrizAir 1400 dehumidifier (127890, 115V, R32).
  • Apply this relationship only to DrizAir 1400 equipment MPN 127890 with a 115V nameplate, R32 label, and manufacture date January 2025 or later.
  • Accept date code 25A or later. The final date-code letter maps A through L to January through December; hold an unreadable or missing label for manual review.
  • Do not extend this BOM to historical identifier 127727, pre-January-2025 equipment, DrizAir 1200, or another dehumidifier family.
  • Confirm the installed marking, physical location, required quantity, connector where applicable, and current manufacturer instructions before ordering.
Fits this model

Dri-Eaz Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded)

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation

Check this model →
  • The official manufacturer parts list identifies 112676S in the main and lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
  • Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
  • Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
  • Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
  • Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
  • Parts list 125311D specifies seventeen in the main housing and one in the lower housing.
  • The official 125310C BOM specifies seventeen 112676S screws in the main assembly and five in the lower-housing assembly.
  • Confirm #10-16 x 3/4-inch high-low thread, Phillips head, and black zinc-plated finish.
  • Confirm assembly location, required quantity, and current parts-list revision before ordering.
03

Specifications

10 details
Component type
High-low screw
DrizAir 1400 dehumidifier BOM quantity
8 each
DrizAir 1400 dehumidifier parts-list assembly
lower housing, wheels, and axle
Velo 2-Speed low-profile air mover BOM quantity
18 each on equipment
Velo 2-Speed low-profile air mover parts-list assembly
main and lower housing
Thread and length
#10-16 x 3/4 in
Head
Phillips
Finish
Black zinc plated
Assembly locations
Main assembly and lower housing assembly
Document
125310C, pages 2 and 3
04

Documentation

6 references
01

Reference

Legend Brands DrizAir 1400 parts list 128386B

The official manufacturer parts list identifies 112676S in the lower housing, wheels, and axle as #10-16 x 3/4-inch high-low phillips screw, with BOM quantity 8 each for DrizAir 1400 dehumidifier (127890, 115V, R32).
02

Reference

Legend Brands DrizAir 1400 manual 0925B

The current manufacturer manual confirms 127890, 115V, R32, service warnings, and the equipment date-code scheme.
03

Reference

Legend Brands Velo injection-molded parts list 125311D

The official manufacturer parts list identifies 112676S in the main and lower housing as #10-16 x 3/4-inch high-low phillips screw, with BOM quantity 18 each on equipment for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
04

Reference

Manufacturer documentation

Used to confirm the published part details.
05

Reference

Legend Brands Velo Pro spare-parts list 125310C

Pages 2 and 3 specify 112676S #10-16 x 3/4-inch high-low Phillips screws with black zinc-plated finish in the main and lower-housing assemblies.
06

Reference

Manufacturer documentation

Used to confirm the published part details.
05

Price and availability

Price check needed
No seller is ready for purchase

Ask us to check current price and stock.

Ask about this part →