Dri-Eaz Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded) parts

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 102724 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 102770 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Verify 12A rating, panel opening, terminals, wiring, trip behavior, and qualified electrical service before installation.

Revision not recorded. Serial range not recorded.

• The manufacturer explicitly identifies 105627/F518 for Velo equipment.
• Confirm 125470/F504 equipment identity, housing generation, attachment points, and included filter before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 106508 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 111834 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Verify 115V circuit, 15A rating, terminals, wiring, ground-fault operation, and qualified electrical service before installation.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 112013S in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 112015S in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 112673S in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 112676S in the main and lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Parts list 125311D specifies seventeen in the main housing and one in the lower housing.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 113464 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Verify cord diameter, panel opening, retention, wiring, and qualified electrical service before installation.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 117210 in the main housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 117248 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 117938 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 119416S in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 121229 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Verify 115V equipment, 5-15P plug, 14/3 SJTW construction, 18-foot length, strain relief, wiring, and qualified electrical service before installation.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 122905 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 123051S in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 123076S in the main housing and electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Parts list 125311D specifies four in the main housing and three in the electrical box.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 123124 in the main housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Keep 123124 distinct from 123124S unless the manufacturer explicitly aliases the identifiers.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 123272 in the main housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 123273 in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 124343 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 124347 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 124793C in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Do not substitute prior single-speed impeller 101431.
• Verify voltage, speed control, connector, rotation, diameter, mounting, and service qualification before installation.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 124875 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Do not substitute prior SPST rocker switch 119709.
• Verify voltage, current rating, switch positions, terminals, wiring, and qualified electrical service before installation.

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation. Serial range not recorded.

• The official manufacturer parts list identifies 125001 in the electrical box for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
• Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
• Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
• Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
• Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
• Do not substitute prior 16 uF capacitor 102541.
• Verify capacitance, voltage rating, connector, mounting, discharge procedure, and qualified electrical service before installation.