WE HAVE ALL PARTSCommercial equipment partsFind a part
MANUFACTURER PART NUMBER119416SLegend Brands, Inc.
Part confirmed

119416S M6 x 18 mm Nylock hex-washer-head screw

Dri-Eaz part 119416S is the m6 x 18 mm nylock hex-washer-head screw documented in official manufacturer service parts for 3 equipment records. Review the equipment-specific fitment, revision, quantity, and ordering constraints below before ordering.

BUYING STATUSPRICE CHECKASK FOR CURRENT PRICE AND STOCK
Part numberConfirmed
Fits3 equipment models – choose yours below
PurchasePrice check needed
Check price and stock
CHECK BEFORE ORDERING

Confirm the exact equipment version

Part confirmed

Part confirmed

The manufacturer part number and item match the documentation. Check the equipment fit separately.

SELLERPRICE CHECKAsk for current price and stock
01

Part numbers

1 numbers
Current MPN119416S
Other numbers119416S
Prior numbersNone listed
02

Equipment fit

3 models
Fits this model

Dri-Eaz LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E)

Revision 125298E; manufacturing date March 2022-present; R410A nameplate required

Check this model →
  • The official manufacturer parts list identifies 119416S in the refrigeration assembly for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
  • Apply this relationship only to Dri-Eaz LGR 6000Li 103614/F600 equipment with a 115V nameplate, an R410A refrigerant label, and a date code of March 2022 or later governed by parts list 125298E.
  • Hard-exclude every R32 machine. Current first-party documentation uses the same 103614/F600 identifier for an incompatible R32 generation, so model and date alone are insufficient.
  • Confirm the complete nameplate, refrigerant label, serial and date code, installed marking, physical location, connector or dimensions, required quantity, and current manufacturer instructions before ordering.
  • Disconnect power before service. Mains-power, control-board, motor, pump, and sealed-refrigeration work requires qualified service and current manufacturer procedures.
Fits this model

Dri-Eaz Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded)

Revision 125311D, August 2021 to present; August 2021 overlap requires hardware confirmation

Check this model →
  • The official manufacturer parts list identifies 119416S in the lower housing for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
  • Apply this relationship only to Dri-Eaz Velo 125470/F504 equipment with a 115V nameplate, injection-molded housing, and two-speed control governed by parts list 125311D.
  • Do not extend this fitment to 114965/F504, any 230V Velo, a rotomolded housing, or equipment governed by parts list 125311C.
  • Parts lists 125311C and 125311D overlap in August 2021. For an August 2021 unit, require serial and date code plus installed motor, switch, and capacitor confirmation or manufacturer confirmation.
  • Confirm the installed marking, physical location, required quantity, voltage where applicable, and current manufacturer instructions before ordering.
03

Specifications

10 details
Component type
Nylock screw
Thread and length
M6 x 18 mm
Head designation
HWH
Manufacturer finish and point codes
XYP / Matpoint
LGR 6000Li dehumidifier BOM quantity
4 each on equipment
LGR 6000Li dehumidifier parts-list assembly
refrigeration assembly
Velo 2-Speed low-profile air mover BOM quantity
4 each on equipment
Velo 2-Speed low-profile air mover parts-list assembly
lower housing
Assembly location
Lower housing assembly
Document
125310C, page 3
04

Documentation

6 references
01

Reference

Legend Brands LGR 6000Li spare-parts list 125298E

The official manufacturer parts list identifies 119416S in the refrigeration assembly as m6 x 18 mm nylock hex-washer-head screw, with BOM quantity 4 each on equipment for LGR 6000Li dehumidifier (103614 / F600, 115V, R410A nameplate, parts list 125298E).
02

Reference

Legend Brands LGR 6000Li manual revision F

The manufacturer separately documents R32 equipment under 103614/F600, proving that the model identifier and manufacture date cannot replace direct refrigerant-nameplate confirmation.
03

Reference

Legend Brands Velo injection-molded parts list 125311D

The official manufacturer parts list identifies 119416S in the lower housing as m6 x 18 mm nylock hex-washer-head screw, with BOM quantity 4 each on equipment for Velo 2-Speed low-profile air mover (125470 / F504, 115V, injection-molded).
04

Reference

Manufacturer documentation

Used to confirm the published part details.
05

Reference

Legend Brands Velo Pro spare-parts list 125310C

Page 3 specifies four 119416S M6 x 18 mm HWH Nylock screws with XYP and Matpoint designations.
06

Reference

Manufacturer documentation

Used to confirm the published part details.
05

Price and availability

Price check needed
No seller is ready for purchase

Ask us to check current price and stock.

Ask about this part →